SUZHOU TISCHBEIN ELEVATOR CO., LTD
TISCHBEIN ELEVATOR, TIED TO SAFETY!
Add to Cart
2.5m/S Machine Room Passenger Elevator for Hotel Residential Building Office Building Or Shopping Mall
TISCHBEIN Passenger elevator adopts an energy-efficient, low-speed, permanent-magnet synchronous gearless traction machine. Compared with traditional geared elevator with equivalent load level, it saves about 33% of energy. The specially designed small-size control cabinet combines the most advanced low-loss IGBTs and the best design solutions to make the room space perfectly arranged.
1.Main parameters:
2. TSO-10 series panoramic elevator of compact layout and optimized space, is not restricted by building structures, which is flexibly applied to various vertical passenger transportation scenarios including shopping mall, supermarket, Business buildings, Hotel, Restaurant, Residential Buildings.
3. Special Features:
1. Safe, reliable and comfortable. The use of permanent magnet synchronous motor drive can effectively stop the phenomenon of lift slippage. At the same time, the motor can provide sufficient torque at low frequency, low pressure and low speed to avoid jittering during the slow start of the lift and improve the comfort of the lift starting and braking process.
2. Permanent-magnet variable-frequency door operator system
No reduction box, low speed output, larger torque, it can save engergy by over 50% when compared with traditional.
3. Since gearless speed regulation is achieved, there is no secondary deceleration process, which eliminates the loss of the gearbox and improves efficiency. At the same time, the use of permanent magnet excitation, no excitation current, no excitation loss, can also make the efficiency increased.
4. High power factor. The power factor can be as high as 0.9 or more.
5. Simple structure, no need for a gearbox, simpler process, while reducing the volume and weight, improving the utilisation of effective space.
6. Machine room-less lifts with various traction methods can be arranged, showing high freedom and flexibility even when there are machine rooms and small machine rooms arranged.
7. Automatic wake-up device can save energy in non-operating conditions of the elevator.
8. Gearless permanent magnet synchronous motor
Increase the transmission efficency by 25%-35% and save energy by over 40% when compared with traditional traction machines.
9. Low vibration and noise, especially in the low speed operation area, the advantages are more obvious, stable operation and high speed regulation accuracy. Most of the noise of traditional gear traction lifts comes from the mechanical vibration generated by the gearbox and the vibration and noise of the high-speed rotating motor itself. The gearless traction machine does not use a gearbox and the rated speed of the motor is very low, so the vibration and noise of the motor itself is very small, thus the noise of the whole lift system is greatly reduced.
10. Energy return technology
Collect the energy generated in the no-load going-up or full load going down to power grid for other equipment.
11. LED illumination system
Reduce electricity consumption by over 30% when compared with traditional light sources.
4. How to get fast quotation
5.
From the raw material to the manufactured goods, TISCHBEIN has a strict QUALITY INSPECTION system to make sure that only qualified products can be shipped out.
No unqualified raw material will be accpetable
When raw material arrives at factory, QC department will make an inspection on all the materials, once any unqualified items detected especially the electric parts, it will be returned to suppliers at once. Only qualified material will collected into raw material warehouse.
Packing
All parts are packed in solid plywood boxes, which can stand long time for sea shipping and fumigation free. For some important parts like control cabinet, door operator and motor, parts will be covered by a strong film first, with desiccant, before put into boxes.
Quality control
1) All raw materials will be checked before get into warehouse. And bulk electronic product do sampling inspection. All parts must have qualified certificate from suppliers. QC1 is responsible for this.
2) During production stage, QC2 will check commissioning for each elevator, escalator and moving walks.
3) After the production of elevator and escalator completed, QC3 will test the match of elevator motor and control cabinet, and the running condition of escalator and moving walks.
4) After packed, QC4 will check package condition for each parts, and takes photo for further reference.
5) When delivery, QC5 will check if all parts packed in container to avoid any missing, and takes photo for further reference.
TISCHBEIN ELEVATOR, TIED TO SAFETY! WELCOME TO CONTACT US!